Minneapolis DuctBlaster® Square Transition

Minneapolis DuctBlaster® Square Transition Piece This Minneapolis DuctBlaster® component is connected to a central return grille or at an air handler cabinet during a duct leakage test...

Minneapolis DuctBlaster® Velcro® Strap for Flex Duct

Velcro® Strap for the Duct Blaster® Flex Duct The replacement Velcro® Strap for the Duct Blaster.® Cinches the flex duct onto the transition pieces.  

No Flow Plate

No Flow Plate The No Flow Plate is included in the standard flow ring set for the Model 3 Minneapolis Blower Door™ fan. The No Flow Plate is installed inside Ring B to close off the inlet...

Plastic Hose Connector

Plastic Hose Connector Use a Plastic Hose Connector to join two pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for hose with an interior...

Plastic T Hose Connector

Plastic T Hose Connector Use a Plastic T Hose Connector to join three pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for hose with an interior...

Polypro Hose Connector - Tapered

Polypro Hose Connector Use a tapered Polypropylene Hose Connector to join two pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for standard...

Red Protective Rubber Boot for DG-1000 Gauge

Red Protective Rubber Boot for DG-1000 Gauge Protect your DG-1000 in the field with a shock-absorbing protective boot! The red silicone boot fits the DG-1000 like a glove while offering...

Replacement Gasket Set for TrueFlow® Adapter Plates

Replacement Gasket Set for TrueFlow® Adapter Plates Set of four 30-inch long pieces of Digital TrueFlow® adapter plate gasket. The trim pieces can be trimmed to length to replace...

Reusable Minneapolis Blower Door™ Fan Shipping Box

Reusable Blower Door Fan Shipping Box Corrugated plastic Model 3 fan shipping box with removable and replaceable foam inserts, helps transport or ship the fan to and from a job site. Features Box...

Ring Fasteners for Blower Door

Set of 8 replacement ring fasteners with hardware for the Blower Door fan housing and attachment rings.  

Roomulator™ Measurement Card (3-pack)

Roomulator™ Measurement Card (Set of 3) The Roomulator™ is a cost-effective tool that can be used in combination with our DG-8 or DG-1000 micro-manometer for the...

Single Fan Blower Door Roll-up Graphic Banner

Sales aid for conferences and trade shows. The banner is a picture of a single fan blower door system, assembled in a doorway.