Camera Probe for HDV700-Series HDV7C-A2-39-HD-1

HD 2-Way Articulating 3.9 mm × 1 m Camera Probe for Extech HDV700-Series High-Performance Videoscope

Camera Probe for HDV700-Series HDV7C-A4-60-1

4-Way Articulating 6 mm × 1 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for HDV700-Series HDV7C-A4-60-3

4-Way Articulating 6 mm × 3 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for the HDV700-Series HDV7C-A2-45-15

2-Way Articulating 4.5 mm × 1.5 m Camera Probe for the Extech HDV700-Series High-Performance Videoscope    

Capacitance Decade Box Extech 380405

The Extech 380405 Capacitance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a...

Carbon Monoxide (CO) Meter Extech CO15

Check CO levels up to 999ppm with the push of a button using Model CO15. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the...

Carbon Monoxide Meter Extech CO10

Checking carbon monoxide levels is as easy as pushing just one button with the Extech C010. This meter can measure CO levels up to 1,000 ppm with a resolution of 1 ppm and ±5% or ±10...

CAT IV Insulation Tester/True RMS MultiMeter Extech MG320

Combines a portable 20GΩ/1000V Insulation Tester with a True RMS MultiMeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and...

CFM/CMM Mini Thermo-Anemometer Extech AN100

The AN100 CFM/CMM Thermo-Anemometer can simultaneously display Air Flow or Air Velocity plus Ambient Temperature. Easy to set area dimensions (ft² or m²) are stored in the meter's internal...

CFM/CMM Mini Thermo-Anemometer with built-in InfraRed Thermometer Extech AN200

AN200 is a CFM/CMM Mini Thermo-Anemometer with built-in InfraRed Thermometer. Built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to...

Chlorine Standard Extech CL207

The CL207 is a Chlorine Calibration Standard for CL200 ExStik Waterproof Chlorine Meter. Product comes with 3 ampules.

Clamp-on Ground Resistance Tester Extech 382357

The 382357 is a Clamp-On Ground Resistance Tester that enables non-contact measurements of ground conductors. True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA resolution...