Quick view Delmhorst Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) MSRP: Now: $115.00 Add to Cart Quick view Delmhorst Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) MSRP: Now: $115.00 Add to Cart Quick view Delmhorst Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* MSRP: Now: $100.00 Add to Cart Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst PE 22 Probe Extension MSRP: Now: $95.00 Add to Cart Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 22-E (1/2 inch Penetration) Electrode MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters MSRP: Now: $90.00 Add to Cart Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 2-E (5/16 inchPenetration) Electrode MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $85.00 Add to Cart Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 832 Long Pin Prod (seed and grain in bags) MSRP: Now: $60.00 Add to Cart Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter MSRP: Now: $65.00 Add to Cart Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open) MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins) Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate... MSRP: Now: $115.00 Add to Cart Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open) MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* 1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup. MSRP: Now: $100.00 Add to Cart Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,... MSRP: Now: $95.00 Add to Cart Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst PE 22 Probe Extension Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length. MSRP: Now: $95.00 Add to Cart Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 22-E (1/2 inch Penetration) Electrode Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 315ELE-0024 Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* 315ELE-0024: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (smooth disc)* The 315ELE-0024 is similar to the 1900 except with a smooth surface for testing flour or granular material. Used with 313CUP-0006 sample cup. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst AMBIENT RH & Temperature Sensor for TotalCheck, Navigator Pro & HT4000 Meters Delmhorst RH/Temp Sensor for TotalCheck, Navigator Pro & HT4000 (Ambient Temperature & RH Only) For Concrete & Floor Testing, see DERHTS3 or RHTS35. MSRP: Now: $90.00 Add to Cart Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 2-E (5/16 inchPenetration) Electrode Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 52-E/C Cup type electrode used for lint or seed cotton. Cup type electrode used for lint or seed cotton. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $85.00 Add to Cart Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)* 830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle. MSRP: Now: $80.00 Add to Cart Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration MSRP: Now: $78.00 Add to Cart Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter 313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly. MSRP: Now: $60.00 Add to Cart Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the... MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 832 Long Pin Prod (seed and grain in bags) Long pin prod – for testing grain in bulk (requires H-4 Handle). MSRP: Now: $60.00 Add to Cart Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected × OK
Quick view Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly. MSRP: Now: $65.00 Add to Cart Previous 1 2 3 4 Next Previous 1 2 3 4 Next Compare Selected