Delmhorst 21-ET (3-1/4 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord

Use on roofs, insulation, or any tests deep below the surface. Pins are insulated, except at the tips. Maximum penetration of #608 pins is 3-1/4 inch. Two pins (insulated) 3 ¼ inch penetration Use on EIFS, insulation and roofs Comes with 3...

Delmhorst TS-102 Sensor for the TM-100 Digital Thermometer (Liquid, Gas & Air)

Delmhorst TS-102 Sensor for the TM-100 Digital Thermometer (Liquid, Gas & Air) (tip length 5.5”, tip diameter .250”)

Delmhorst TS-107 Sensor for the TM-100 Digital Thermometer (Granular Material, Solids, Grain, Hay)

Delmhorst TS-107 Sensor for the TM-100 Digital Thermometer (Granular Material, Solids, Grain, Hay) (Overall length 3.5”, tip diameter .625”) **Requires the SH-44 Handle

Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open)

Delmhorst 315CAB-0020/050 Kil-Mo-Trol Main Cable: 3 Conductor 50 Ft (Plug/Open)

Delmhorst 18-ES insulation assembly 315INS-0003 (For 608 Pins)

  Replacement assembly for the 18-ES of the part to attach longer 4 inch pins (part #608) on to your 26-ES without needing to purchase a new 18-ES. The 315INS-0003 insulation assembly incorporates different pin chucks and retainers to accommodate...

Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer

Delmhorst SH-44 Sensor Handle for TM-100 Digital Thermometer

Delmhorst 22-ET (1/2 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord

Used for softwoods. Comes with #A-111 contact pin for 1 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins

Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open)

Delmhorst 315CAB-0021/050 Kil-Mo-Trol Main Cable: 2 Conductor 50 Ft (Plug/Open)

Delmhorst 1900 Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)*

1900: Heavy Duty Upper Electrode Assembly for the G-7 Grain Moisture Meter (serrated disc)* The 1900 is the standard upper electrode assembly for the G-7 grain moisture meter. The 1900 has a serrated face, and is used with 313CUP-0005 sample cup.

Delmhorst 2-ET (5/16 inch Penetration) Electrode w/Tapped Handle & 3.5' Extension Cord

Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration Use on plaster, masonry, paper tubes,...

Delmhorst PE 22 Probe Extension

Delmhorst PE 22 Probe extension. Used with TS-107 Sensor. Available in 3 ft. length.

Delmhorst 22-E (1/2 inch Penetration) Electrode

Used for softwoods. Comes with #A-111 contact pin for 1/2" penetration. Two pins 1/2" penetration Use on roofing and insulation Will also take #496, insulated pins