Onset Trans,0-300V,333mV Out PT,SPT-0375-300 - T-MAG-SPT-300

Overview The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accuracy of ±1% (from 10% to...

Onset Pulse Input Adapter - Electronic Switch - S-UCC-M001

Overview The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic...

Onset Pulse Input Adapter - Contact Closure - S-UCD-M001

Overview The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to data loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches with a maximum input...

Onset Full Cross Arm Kit - M-CAA

OverviewFor use with Onset tripods or masts, the full cross arm assures unobstructed wind measurement. Full cross arm (91.2cm/36in) provides mounting for two wind sensors.91.5 x 3.2 x 3.2 cm (36 x 1.25 x 1.25 in)Includes mast-mounting hardware

Onset Trans,0-600A ,333mV Out CT,SCT-2000-600 - T-MAG-SCT-600

Overview The Magnelab AC Current 600 Amp AC Current Transformer or CT (Magnelab part # SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart...

Onset Trans, 0-100A, 333mV Out CT, SCT-1250-100 - T-MAG-SCT-100

Overview The Magnelab AC Current 100 Amp AC Current Transformer or CT (Magnelab part # SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart...

Onset Trans,0-200A,333mV Out CT,SCT-1250-200 - T-MAG-SCT-200

Overview The Magnelab AC Current 200 Amp AC Current Transformer or CT (Magnelab part # SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart...

Onset Half Cross Arm Kit - M-CAB

OverviewFor use with Onset tripods or masts, the half cross arm assures unobstructed wind measurement. Half cross arm (49cm/19.2in) provides mounting for one wind sensorComponents1 Half Cross Arm2 ¼-20 x 2 ¾” Hex Head Bolts3 ¼” Stainless Steel Flat...

Onset 25m Smart Sensor Extension Cable - S-EXT-M025

OverviewA 25-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptorIn what environment does this cable operate?This cable operates in indoor and outdoor environments.

Onset HOBO Self-Describing Self-Describing 6-foot Pipe Temperature Sensor - SD-TEMP-P-06

Overview For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air water soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology...

Onset HOBO Self-Describing 6-foot Self-Describing Air/Water/Soil Temperature Sensor - SD-TEMP-06

Overview For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air water soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology...

Onset HOBO Self-Describing 20-foot Self-Describing Air/Water/Soil Temperature Sensor - SD-TEMP-20

Overview For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air water soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology...