Product Description
testo 330i LX - Advanced flue gas analyzer kit
The first remote-controlled flue gas analyzer
Operation of the testo 330i LX flue gas analyzer and the display of its readings are implemented wirelessly via the testo 330i LX app on your smartphone or tablet. Therefore, when making adjustments to a system, you always have the readings at hand. In the app, you can enter customer data, make adjustments to measuring instrument settings, and add comments or photos to measurement protocols on site, and send them to your customer or your office via email. If you need the results of your work on paper, no problem.Requirements: iOS 7.1 / Android 4.3 or newer. Mobile end device with Bluetooth 4.0.
Further advantages of the testo 330i LX flue gas analyzer
- User-replaceable long life sensors with a service life of up to 6 years. This saves at least one sensor replacement over the instrument's typical useful life.
- H2-compensated CO measuring cell. The testo 330i LX is also approved for official acceptance testing of heating systems.
- TÜV-tested according to the 1st German Federal Immission Control Ordinance (BImSchV) and EN 50379, Parts 1 - 3.
- Integrated draught and gas zeroing, without removing the probe. The probe can remain in the flue during zeroing.
- Fresh air dilution upon exceeding a CO threshold value up to 30,000 ppm.
Flue gas analyzer kit with practical accessories
The testo 330i LX advanced flue gas analyzer kit includes the following probes:- Modular flue gas sampling probe (probe length 7.1 in.), with 25.6 in. long extra-flexible hose
- Combustion air temperature probe, 7.5 in. long
Delivery Scope
• testo 330i LX flue gas analyzer with H2-compensated CO sensor (0632 3000 51)
• Modular flue gas probe with hose, 25.6 in. (0600 9781)
• International mains unit (0554 1096)
• testoFix probe holder for probes, with a diameter of 0.3 in. (0554 3006)
• Instrument case for testo 330i LX, probes, and accessories (20.5 × 5.1 × 15.7 in., W × H × D) (0516 3302)
• Modular flue gas probe with hose, 25.6 in. (0600 9781)
• International mains unit (0554 1096)
• testoFix probe holder for probes, with a diameter of 0.3 in. (0554 3006)
• Instrument case for testo 330i LX, probes, and accessories (20.5 × 5.1 × 15.7 in., W × H × D) (0516 3302)
Product brochure testo 330i(pdf, 471.79 kB)
EU declaration of conformity testo 330i(pdf, 33.05 kB)
Startup & safety testo 330i(pdf, 576.83 kB)
Instruction manual testo 330i(pdf, 5.07 MB)
Testo ZIV driver ZIV 2000 for testo 320 and testo 330(v2.1, 2.22 MB)
Testo ZIV driver for testo 300, testo 320 and testo 330(v2.3, 64.11 MB)
Firmware testo 330i(v2.11, 3.56 MB)
Update-Kit / Bootloader(V1.22, 1.24 MB)