6 Rolls of 8" DuctMask™ Premium Temporary Register Sealing Tape

DuctMask™ Premium Temporary Register Sealing Tape Sold by the case only. This case contains: 6 rolls of tape. Each are 8 inches wide, 200 feet long, and have 4 inch perforations...

Aluminum Frame Case - Gray

Case for Aluminum Frame Nylon case for the standard 40 x 96 inch aluminum blower door frame. This case helps transport the blower door frame components.  A new complete blower door frame is...

Aluminum Frame Corner Block

Aluminum Frame Corner Block A frame corner block is fastened to both the top and bottom of the vertical blower door frame piece by a bolt and nut. The corner block snaps into the horizontal frame...

Aluminum Frame End Cap

Aluminum Frame End Cap A replacement part for blower door frame pieces that provides a flat surface for the cam levers to lock and adjust the size of the frame.

Aluminum Frame Velcro® Strap

Aluminum Frame Velcro® Strap The Velcro® strap for a blower door aluminum frame cross bar, loops through to the blower door fan handle to stabilize the fan in the assembled blower...

Barrel Jack Gauge Power Adapter

Barrel Jack Power Adapter for Digital Gauges and Charger for DG-1000 with serial numbers 9540 and lower. Use only the TEC approved power adapter or charger cord with TEC digital gauges...

Calibration Comparison Kit

Calibration Comparison Kit The Calibration Comparison Kit can be used to confirm that your gauge is still within the manufacturer’s calibration specification using a Reference Standard and...

Cam Lever Unit for Horizontal Aluminum Frame Piece

Cam Lever Unit for Horizontal Aluminum Frame Piece This cam lever is for the horizontal pieces and cross bars of a blower door frame. Once adjusted to fit inside the door or window opening, the cam...

Cam Lever Unit for Vertical Aluminum Frame Piece

Cam Lever Unit for Vertical Aluminum Frame Piece This cam lever is for the vertical pieces of a blower door frame. Once adjusted to fit inside the door or window opening, the cam lever locks the...

Commercial Blower Door Speed Controller Hanger Board

Commercial Blower Door Speed Controller Hanger Board A controller hanger board for mounting up to three Blower Door Model 3 Speed Controllers to a frame set during large building (commercial)...

Commercial Fan Speed Control Cable

Commercial Fan Speed Control Cable This cable connects one DG-700 or DG-1000 and up to three fan speed controllers via the 3.5 mm PWM jacks. Connection allows the digital gauge to control the speed...

DG-1000 Digital Pressure and Flow Gauge

DG-1000 Digital Pressure and Flow Gauge Two-channel digital micro manometer for pressure and flow measurements.  Primarily used with Minneapolis Blower Door™ and Minneapolis...