Onset Temp/RH Sensor (12-bit) w/ 2m Cable - S-THB-M002 1

Product Description

Overview
The 12-bit Temperature/Relative Humidity Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors. All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.

Highlighted Features

• Smart Sensor
• Works with all loggers that accept Smart Sensor inputs
• Automatically communicates configuration data to the logger

In what environment does this sensor operate?
This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?
The S-THB-M002 sensor supports the following measurements: Relative Humidity and Temperature

To see the full specifications for this product, please see our product manual found under the documentation tab if available.

Measurement Range:

Temp: -40°C to 75°C (-40°F to 167°F)

RH: 0-100% RH at -40° to 75°C (-40° to 167°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%

Accuracy:

Temp: +/- 0.21°C from 0° to 50°C (0.38°F from 32° to 122°F)

RH: +/- 2.5% from 10% to 90% RH (typical), to a maximum of +/- 3.5%.

Resolution:

Temp: 0.02°C at 25°C (0.04°F at 77°F)

RH: 0.1% RH at 25°C (77°F)

Bits Per Sample:

Temp: 12

RH: 10

Drift:

Temp: < 0.1°C (0.18°F) per year

RH: < 1% per year typical; hysteresis 1%

Response Time:

Temp: 5 minutes in air moving 1 m/sec

RH: 5 minutes in air moving 1 m/sec with protective cap