Product Description
FLIR DM93 Digital Multimeter
FLIR DM93 Digital Multimeter Features
VFD Mode
Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.
LoZ Mode
Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.
Continuous Data Recording
Detect intermittent glitches by allowing the FLIR DM93 to collect measurement data unattended over time.
Bright Dual-LED Worklights
Make your work safer and easier by illuminating dimly lit inspection areas.
METERLiNK® Compatibility
Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR infrared cameras.
Bluetooth Connectivity
Connect to Android devices for remote diagnostics in hard-to-reach and hazardous areas. Also, upload files without the need for special cords.
Rugged, Shock-Resistant
Double-molded rubber case design enhances reliability on the job site and durability for the long haul.
Convenience Features
- No need to select AC or DC Mode for quick tests
- Backlight features user-configurable timeout
- Large, sharp display is easy to see
- Tool-less battery changing
- Built-in tilt stand
DM93 Digital Multimeter Specifications
Technical Summary |
||
| Range | Basic Accuracy | |
| DC Voltage | 1000.0 V | +/- 0.05% |
| AC Voltage | 1000.0 V | +/- 0.05% |
| VFD Voltage | 1000.0 V | +/- 0.05% |
| DC Current | 10.000 A | +/- 0.2% |
| AC Current | 10.000 A | +/- 1.0% |
| Resistance | 40.00 MΩ | +/- 0.2% |
| Continuity Threshold | 30 Ω | +/- 0.2% |
| Frequency | 100.00 kHz | +/- 5 Digits |
| Capacitance | 40.00 mF | +/- 0.9% |
| Temperature | -328 to 2192°F, -200 to 1200°C | +/- 1.0% |
| Diode Test | 2 V | +/- 1.5% |
General Information |
||
| Bluetooth Range Max | 32 ft (10 m) | |
| Display Counts | 40,000 | |
| Safety Category | CAT IV-600V, CAT III-1000V | |
| Data Recording | 20,000 Pts (125 days max) | |
| Warranty | Limited Lifetime | |
| Certifications | CE, UL, FCC | |
