FLIR CM78 Industrial Clamp with IR Thermometer Features
AC/DC (1000A or 1000V)
Take accurate AC/DC measurements (up to 1000A or 1000V) safely and quickly on high-powered equipment and complex machinery.
Save time by attaching the meter to the target when the panel is de-energized, then measure the active equipment when the panel is closed.
Spot-Laser IR Thermometer
Quickly scan for hot spots on panels, conduits, and motors using the built-in non-contact IR thermometer.
Type K Thermocouple
Verify that associated current measurements and temperature readings are correctly aligned and in spec.
Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
Bright Dual-LED Worklights
Make your work safer/easier in poorly lit locations especially useful when the lights are out or obstacles block your inspection targets.
Rugged & Shock-Resistant
Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.
FLIR CM78 Industrial Clamp with IR Thermometer Specifications
|AC/DC Current Range||1000 A||+/- 2.5%|
|AC/DC Voltage||1000 V||+/- 1.5%|
|Resistance||40.00 MÎ©||+/- 1.5%|
|Capacitance||4.000 mF||+/- 3%|
|Frequency||4000 Hz||+/- 31.5|
|Temperature (IR)||-58 to 518°F, -50 to 270°C||+/- 2%|
|IR Distance to Target Ratio||8 : 1 in|
|Temperature (Type K)||-4 to 1400°F, -20 to 760°C||+/- 3%|
|Bluetooth Range Max||32 ft (10 m)|
|Jaw Opening||42 mm (1.7 in, 2000MCM)|
|Safety Category||CAT IV-600V, CAT III-1000V|
|Certifications||CE, UL, FCC|