EDTM Low E Contact Meter

Product Description

EDTM Low E Contact Meter

Low-E Contact Meter

The CM1030 detects any conductive surface, including Low E coatings on single sheets of glass. Simply press the meter against a piece of glass to determine wheter the surface you are touching contaings any conductive (Low E) coatings.

The tester uses four (4) non-scratch pads on it's back side that prevent damage to coatings and provide a fast, easy test - ideal for the manufacturing environment.

Please Note: The CM1030 works on single panes of glass only by directly contacting the test surface. Since Low E Coatings are oriented on the inner pane of IG units, the CM1030 is not suitable for use on manufactured IG's. Please see the Etekt + if you need to test manufactured windows.

The CM1030 has a unique design that allows you to test hard coat (pyrolytic) or soft coat (sputter) Low-E coatings. Because of the ultra-sensitive design, the meter is even capable of detecting most coatings that are protected by a thin protective dielectric coating.

The CM1030 is specifically designed for the manufacturing environment. Due to the meter's simplicity, production personnel will need minimal training to understand the meter's indication. The CM1030 is great for identifying the orientation of Low E glass as it is being placed into the washers or assembled into insulating glass assemblies.

• Ultra-sensitive design detects all conductive coatings including hard coat or soft coat Low-E applications
• Identify Low-E in production easily and prevent costly mistakes
• Non-scratch pads prevent damage to coatings
• Great quantity discounts and private labeling available
• Suitable for single panes of glass only. Please see the Etekt + if your testing application is anything other than single panes of glass.

APPLICATIONS
The CM1030 is a simple instrument that detects any conductive surface, including Low E coatings on single sheets of glass. The meter has a unique design that allows you to easily test hard coat (pyrolytic) or soft coat (sputter) Low E coatings. Because of the ultra-sensitive design, the meter is even capable of detecting most coatings that are protected by a thin protective dielectric coating.

The CM1030 is the ideal product for the manufacturing environment. For production environments where hand-held products tend to disappear and get abused, the low cost CM1030 is a great addition. Due to the simplicity of the meter, production personnel do not require extensive training to understand the meters indication.

The CM1030 is great for identifying the orientation of the Low E glass as it is being placed into the washers or assembled into insulating glass assemblies. It also can be valuable in edge deletion applications, where the operator must confirm the Low E side of the glass. All Low E handlers in the production environment should be equipped with this low cost assistant.

Because of its professional appearance and low price, the CM1030 provides a GREAT sales aid to be distributed to your customers. Help your customers reduce their mistakes in handling Low E glass.

TESTING SEALED INSULATING UNITS
The CM1030 must physically come into contact with the conductive (Low E) coating in order to detect it (continuity measurement). Therefore the CM1030 can NOT be used to test IG units that have already been assembled. For applications where you are working with sealed insulating glass (IG) units, upgrade to the "ETEKT+" Low E Coating Detector (EDTM Model# AE1601). For sealed insulating units, the AE1601 can take measurements without physically touching the conductive coating. This offers a tremendous advantage if a sealed IG unit must be tested for the invisible Low E coating, either in the factory or in the field.