EDTM 4 Point Surface Resistivity Meter - RC2175
RC2175: R-Chek Four Point Resistivity Meter
Remove all doubt and be sure that your product is coated properly... Without breaking the bank!
EDTM, Inc. is proud to offer four point sheet resistance meters for under $500 that are calibrated to standards that are traceable to a NIST traceable source.
The resistance of a thin film/coating is directly proportional to the resistivity and is an important QUALITY CONTROL component of a coating. Therefore, resistivity may be the largest single item to determine the repeatability and function of a coating. Sheet resistance has the units of ohms, but it is convenient to refer to it in ohms per square since the sheet resistance produces the resistance of the coating within any square area. This parameter is therefore measured using the 4-point technique.
Pocket Size Protection for Production, R & D, Sales, and Quality Assurance personnell who must know their products are "coated" properly.
- Inspecting coated glass
- Solar Panels or Solar Cells
- Automotive Mirrors
- Freezer Doors
- Glass Top Stoves
- Many other industries
To Operate the R-Chek:
Press against surface
Push Button to activate
Read display for measurement
RC2175 Quick Facts
- Range of 0-19990 ohms/square
- Calibrated to standards that are traceable to a NIST traceable source
- Used worldwide for over 13 years
|SCALE:||x 1||x 10|
|RANGE:||0-1999 ohms/square||0-19990 ohms/square|
|RESOLUTION:||1 ohms/square||10 ohms/square|
|ACCURACY:||3% up to 1000||6% up to 1990|