Defender CA6150 10-Year Carbon Monoxide Alarm (with digital display)

• Sealed Lithium Battery Powered Carbon Monoxide Alarm
• Two Non-Removable FDK Fuji Lithium Batteries with Soldered Connections
• Automatic and Manual Battery Activation
• Accurate and Reliable Water-Based Electrochemical Sensor
• Integrated Filter for Removing Nuisance Gases
• Samples for Carbon Monoxide (CO) Every 10 Seconds
• Easy-to-Read Alpha-Numeric Digital LCD Display
• One-Touch Readout of Current CO Level Detected from 10 PPM to 999 PPM
• Automatically Displays Current CO Level Detected from 30 PPM to 999 PPM
• Memory Displays Peak CO Level Detected from 10 PPM to 999 PPM
• Memory Displays Duration of Peak CO Level from 1 to 999 Minutes
• Separate Display and Test Buttons
• Separate Alarm, Power and Service LED’s
• Audible and Visual Alarm Signals
• Instant Test/Reset/Mute Feature
• Internal Microprocessor Monitors Sensor Function
• Auto. Alert when Alarm Reaches End of its Life
• Operating Temperature and Humidity: 40°F to 100°F at 10% to 95% RH
• Durable Flame Retardant ABS Construction
• Ten Year Factory Warranty for Alarm and Batteries
• Manufactured in Canada

• Current carbon monoxide level detected from 10 to 999 ppm
• Highest carbon monoxide level detected from 10 to 999 ppm
• Duration of the peak CO level detected from 0 to 999 minutes

• Chronic Alarm Time: Within 60-240 minutes at 70 ppm*
• Acute Alarm Time: Within 4-15 minutes at 400 ppm
• Audible 85dB Pulsating Alarm Signal: 4 Beeps Every 6 Seconds
• Visual Alarm Signals: Current CO Level and Flashing Red Alarm LED
• Low Battery Signals: Displays Battery Symbol, Beeps Once per Minute, Flashes Green Power LED
• Malfunction Signals: Displays "Err", Sounds 2 Beeps per Minute, Flashes Red Service LED
• Sensor End-of-Life Signals: Displays "End", Beeps Once per Minute, Flashes Red Service LED

• Two Factory Sealed 10-Year Lithium Batteries are Non-Removable
• Automatic Battery Activation when Alarm is Attached to Mounting Plate
• Integral Restraint Secures Alarm with Phillips Screw through Alarm Body into Mounting Plate

• 100% Tested: Every Defender CA6150 is 100% tested at three different levels of carbon monoxide during production.
• UL Listed: Underwriters Laboratories Tested and Listed to latest ANSI/UL 2034 Standard. See UL File No. CZHF.E359861.
• NFPA and ASHRAE Compliant: Complies with NFPA 720-2015 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, and ASHRAE 62.2-2016 Standard for Ventilation and Acceptable Indoor Air Quality in Residential Buildings.
• CSFM Approved: This carbon monoxide alarm has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing No. 5276-2122:0101 for allowable values and/or conditions for use concerning material presented in this document.

NOTE: The UL 2034 Standard for Residential Single and Multiple Station Carbon Monoxide (CO) Alarms requires that UL Listed CO alarms activate an alarm signal at or below 70 PPM within 60-240 minutes. To assure compliance with this standard, the Defender CA6150 may activate audible and visual alarm signals at CO levels as low as 45 PPM within 90 minutes.

The Defender CA6150 is not designed for use in vehicles or unconditioned spaces, or to measure compliance with OSHA, commercial or industrial standards.

• Alarm Color: White
• Alarm Size: 5½" x 3¾" x 1…œ"
• Alarm Weight: 8 oz
• Unit Boxed Dimensions: 7" x 5" x 2½"
• Unit Boxed Weight: 12 oz.
• Distribution Center: Ventura California