Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters Used for testing standard bales. Attaches directly to the connector on top of the meter. For Delmhorst F6, F2000, FX2000 hay moisture meters and P2000 paper moisture meters.Not recommended for P2000 or RDM3-P as the density of paper bales causes undo... MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters Used for testing standard bales. Attaches directly to the meter. (18 inch version) For Delmhorst F6, F2000, FX2000 hay moisture meters and P2000 paper moisture meters.Not recommended for P2000 or RDM3-P as the density of paper bales causes undo stress... MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst 21-E (3-1/4 inch Penetration) Electrode Use on roofs, insulation, or any tests deep below the surface. Pins are insulated, except at the tips. Maximum penetration of #608 pins is 3-1/4 inch. Two pins (insulated) 3 ¼ inch penetration Use on EIFS, insulation and roofs MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Pack of 24 (5/16 inch Penetration) Pins User replaceable contact pins for the BD10, BD2100 and JLite moisture meters by Delmhorst. Contact pin and retainer with overall penetration of 5/16". Standard on all J- and BD-series meters and the #2-E electrode. Used on wood up to 6/4,... MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer Pack of 24 contact pins used on the 26-ES hammer with 1/2" penetration. MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters Used for testing standard bales. Attaches directly to the meter. (18 inch version) For Delmhorst F6, F2000, FX2000 hay moisture meters and P2000 paper moisture meters.Not recommended for P2000 or RDM3-P as the density of paper bales causes undo stress... MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst 21-E (3-1/4 inch Penetration) Electrode Use on roofs, insulation, or any tests deep below the surface. Pins are insulated, except at the tips. Maximum penetration of #608 pins is 3-1/4 inch. Two pins (insulated) 3 ¼ inch penetration Use on EIFS, insulation and roofs MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Pack of 24 (5/16 inch Penetration) Pins User replaceable contact pins for the BD10, BD2100 and JLite moisture meters by Delmhorst. Contact pin and retainer with overall penetration of 5/16". Standard on all J- and BD-series meters and the #2-E electrode. Used on wood up to 6/4,... MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer Pack of 24 contact pins used on the 26-ES hammer with 1/2" penetration. MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 21-E (3-1/4 inch Penetration) Electrode Use on roofs, insulation, or any tests deep below the surface. Pins are insulated, except at the tips. Maximum penetration of #608 pins is 3-1/4 inch. Two pins (insulated) 3 ¼ inch penetration Use on EIFS, insulation and roofs MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Pack of 24 (5/16 inch Penetration) Pins User replaceable contact pins for the BD10, BD2100 and JLite moisture meters by Delmhorst. Contact pin and retainer with overall penetration of 5/16". Standard on all J- and BD-series meters and the #2-E electrode. Used on wood up to 6/4,... MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer Pack of 24 contact pins used on the 26-ES hammer with 1/2" penetration. MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Pack of 24 (5/16 inch Penetration) Pins User replaceable contact pins for the BD10, BD2100 and JLite moisture meters by Delmhorst. Contact pin and retainer with overall penetration of 5/16". Standard on all J- and BD-series meters and the #2-E electrode. Used on wood up to 6/4,... MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer Pack of 24 contact pins used on the 26-ES hammer with 1/2" penetration. MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer Pack of 24 contact pins used on the 26-ES hammer with 1/2" penetration. MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E 4 inch pins (pack of 4) for the 21E probe by Delmhorst. Used on insulation. Standard on the #21-E, the #608 contact pins are insulated except at the tips. 4 inch overall length, 3 ¼ inch penetration. Also available as #608/001. 7 inch... MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters This moisture content standard is great for verifying that your F-series hay moisture meter is in calibration. With two electrical resistance values (10% and 20%) to test your meter against, you can be sure that your readings will stand up to the... MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 26-ES Hammer Electrode The industry standard for lumber and woodworking, this electrode allows you to determine moisture gradients. The contact pins that come with the 26-ES have insulated shanks so that only the tips are exposed. The pins make contact with the wood fiber only... MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst H-4 Handle Delmhorst H-4 Handle for use with P2000 Paper Moisture Meter and all Delmhorst Hay Type Moisture meters. MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E 6 inch pins (pack of 4) for the 21E probe by Delmhorst. Used for testing EIFS. The #608/0014 contact pins are insulated except at the tips. 7 inches overall length, 6-inch penetration. Used for testing EIFS. Also available as #608/4 - 4 inch... MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* 830-2: 10" Prod - for testing standard and high density bales. Use with H-4 Handle. MSRP: Now: $67.00 Add to Cart Compare Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 1235 10" Prod for Hay and Paper Meters MSRP: Now: $72.00 Add to Cart Compare Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst 1235 18" Prod for Hay and Paper Meters MSRP: Now: $88.00 Add to Cart Compare Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 21-E (3-1/4 inch Penetration) Electrode MSRP: Now: $112.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst Pack of 24 (5/16 inch Penetration) Pins MSRP: Now: $54.00 Add to Cart Compare Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Pack of 24 Pins (1/2 inch penetration) for the 26ES Hammer MSRP: Now: $78.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst Pack of 4 Pins (3-1/4 inch Penetration) for the 21E MSRP: Now: $60.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst MCS-5 Calibration standard (10% & 20%) F Series Meters MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst MCS-1 Calibration standard (12% & 22%) Douglas Fir MSRP: Now: $45.00 Add to Cart Compare Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 26-ES Hammer Electrode MSRP: Now: $150.00 Add to Cart Compare Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst H-4 Handle MSRP: Now: $80.00 Add to Cart Compare Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst Pack of 4 Pins (6 inch penetration to test EIFS) for the 21E MSRP: Now: $70.00 Add to Cart Compare Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected × OK
Quick view Delmhorst Delmhorst 830-2 10" Prod for Hay & Paper Meters *(Requires H4 Handle!)* MSRP: Now: $67.00 Add to Cart Compare 1 2 3 4 5 6 Next 1 2 3 4 5 6 Next Compare Selected
